Blue Screen Error 0x00000004 - IRQ_NOT_LESS_OR_EQUAL
INVALID_DATA_ACCESS_TRAP
- Restart your computer if you haven't already done so. The STOP 0x00000004 could just be a fluke, and the blue screen error may not occur again after rebooting
- Did you just install or make a change to a device? If so, there's a good chance that the change you made caused the STOP 0x00000004 error. Undo the change and test for the 0x4 blue screen error.
- Depending on what changes were made, some solutions might include:
- Removing or reconfiguring the newly installed device
- Starting up with Last Known Good Configuration to undo related registry and driver changes
- Using System Restore to undo recent changes
- Rolling back the device driver to the version prior to your driver update
3.Update the drivers for your devices. If the driver to your hard drive or some other device is outdated or corrupted, it could be causing the STOP 0x00000004 error.
4. Scan your computer for viruses that could be causing the STOP 0x00000004 error.
4. Scan your computer for viruses that could be causing the STOP 0x00000004 error.
- 5. Clear the CMOS. Sometimes the STOP 0x00000004 error is caused by a BIOS memory issue, so clearing the CMOS could solve that problem.
- 6.Test the hard drive for errors. A physical problem with the hard drive could be what's revealing the STOP 0x4 error.
- 7. Test the system memory for errors. If the hard drive isn't at fault, faulty RAM might be what's causing the STOP 0x00000004 error.
8. Perform basic STOP error troubleshooting. These extensive troubleshooting steps aren't specific to the STOP 0x00000004 error but since most STOP errors are so similar, they should help resolve it.